SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.

SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.

SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.

SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.

SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.

SECURE should be fixed at a location such that:

1. It is able to connect to your home wi-fi router, and
2. It is able to connect with all the wireless sensors in your home.

Here is the suggested procedure:

1. Fix the sensors at their designated locations with double-sided tape.
2. Keep the SECURE such that it is able to receive transmissions from all the sensors.
3. Once you arrive at a suitable location for SECURE, you may fix SECURE on the wall according to the installation manual.
4. Remove the double-sided tape on the sensors and fix them securely using the manufacturer-provided installation kits.

The door intrusion sensors come in 2 parts — magnet (to be installed on the door) and sensor (to be aligned with the magnet and installed on the door frame). These should be installed vertically in a position as high as possible. Follow the instructions given in the installation manual given along with the sensor.

Follow the following guidelines for the positioning of the PIR sensor.

1. The PIR should be ideally located on the wall at a height between 1.95 metres (6-1/2 feet) and 3 metres (10 feet). At this location, it should have the desired coverage.
2. At this location,SECURE should be capable of receiving wireless transmission from the PIR.

A few do’s and don’ts:

1. Do not position the PIR sensor pointing at a staircase which pets have access to. Also, do not keep any furniture of height 1 metre or above, closer than 1.8 metres (6 feet) from the PIR that a pet climb.
2. Do not direct the PIR sensor at any shiny object that may reflect light and cause it to fall on the sensor. This may result in false alarms.
3. Do not fix the sensor at a location that would have high air flow, such as a high-speed fan or air conditioner.
4. Do not obstruct the coverage of the PIR with large cabinets or large plants.
5. Do not fix the PIR near sources of moisture.

LPG is chemically heavier than Air. It tends to accumulate at the floor level near the point of leak. The Gas Leak Detector should be installed at an ideal height of 490mm from the Finished Floor Level (FFL). If this location is not a feasible it can be kept in an location which would contain most of the LPG gas leaked.

The ideal location for a heat sensor is shown in the diagrams below. (Courtesy: The internet)

The ideal location for a glass break detector is shown in the diagrams below. (Courtesy: The internet)

At this point in time, SECURE is not compatible with other security systems. So it is not possible to make your security system work with SECURE.

At this point in time, SECURE is not compatible with 3rd party sensors bought from the market.