Step 1: Open the Lumos box. The box shall have the following contents as below:
Step 2: Connect the Cable harness with the SPDT switches, based on the connection diagram.
Wirelessly connected to the Home Router
Step 3: Note down the MAC ID of the module.
Step 4: Place the connectors to LUMOS in the desired slots.
Step 5: Place the LUMOS in the Back Box.
Step 6: Close the Switch Box.
Note: NEUTRAL must be available in the Back Box.
This completes the installation of LUMOS
The next step is the configuration of Lumos
For configuration steps please click on the link below:
www.silvanlifestyle.co.in/lumos/configuration
address:
Silvan Innovation Labs Pvt. Ltd. No 13, Zain Burj, 8th Cross, 2nd Main, Indiranagar 1st Stage, Bangalore - 560038
Phone: +91 80 4126 3541,
+91 80 4093 7238
SALES : +91 - 9108001823 - 29
SUPPORT : +91 - 9108001821 - 22
Email Us:
Sales : sales@silvan.co.in
Support : support@silvan.co.in
Next