Installation of zPLY:

Step 1: Open the zPLY box. The box shall have the following contents as below:

1. zPLY
2. DC Adapter
3. LAN Cable
4. RCA to 3.5 mm Female Cable

Step 2: Connect the DC adapter with zPLY and then to the identified power socket. zPLY needs around 5 minutes to boot.

Place zPLY near the Amplifier and connect the RCA to 3.5 mm Cable.
Note: zPLY can be placed anywhere in the house, but it has to be connected using a LAN cable to the Wi-Fi router. zPLY needs to be connected to the Amplifier using the specified cable only.

Step 4: Connect the LAN Cable to zPLY & Wi-Fi router, this completes the installation of zPLY.